Call Now - 9729536305, 9896436305
STP LIMITED
TarFelt® BH
Benefits :
- Economical
- Good dimensional stability under tension
- Excellent resistance to positive water and vapour pressure
- Totally impermeable
- Flexibility to adopt all types of contours
Application Area :
- Inverted Roofs & parapets
- Terraces, balconies & patios
- Sunken slabs, bridges and tunnels
- Suitable for all types of roofs – concrete, asbestos, cement sheets, corrugated iron sheets, wooden decking, false ceiling tops, under Mangalore tiles, etc. virtually on all firm surfaces
Pack Size :
- 1 m x 20 m roll
ShaliSeal® PS PG
Benefits :
- Excellent UV resistant.
- Provides uniform, water tight seal.
- Adhesion compatible to most substrate.
- Highly resilient with excellent recovery characteristics and thermal flexibility.
- Prevents cracking by allowing expansion / contraction during atmospheric changes.
- Flexible, tear resistant, rubbery, self-leveling.
- Chemical / flame / fuel resistant.
- After full cure
- Can withstand in fully submerged condition, and
- The Sealant is suitable for potable water as well.
Application Area :
- Expansion joints in industrial, commercial or residential buildings.
- Joints in concrete roads, bridges, subways, flyovers & airport runway.
- Joints in water retaining structures like water tank, swimming pool including decks, aqua
- ducts, dams, canals & reservoirs.
- Nuclear Power station reactor domes.
- Joints between concrete pipe lines.
- Roof light joints.
Pack Size :
- 20kg
ShaliKote® T-10 / T-10A
Benefits :
- ShaliKote® T-10 gives a coating, which, when set, is impermeable to water and remains unaffected by attacks of industrial fumes, saline atmosphere, etc. It resists low temperature
- cracking and also does not crack under the influence of strong sunlight. ShaliKote® T-10A has smoother finish and better flow as compared to ShaliKote® T-10.
Application Area :
- ShaliKote® T-10 / ShaliKote® T-10A is recommended for waterproofing of leaky walls / surfaces or places where heating of bitumen is not desirable or prohibited.
Pack Size :
- 20kg
- 200kg
ShaliPlast® IW CI
Benefits :
- Corrosion resistant & highly impermeable.
- Easily dispersible & compatible with RCC.
- High compressive strength.
- Reduces shrinkage crack development.
- Provides greater workability.
- Increases durability of concrete.
Application Area :
- Bridges and Marine structures
- Used in RCC floors, walls and slabs
- Mass concrete casting making dyke walls
- Deicing areas
Pack Size :
- 1L
- 20L
- 200L
ShaliTex® Primer WB
Benefits :
- Environment friendly, Zero VOC, ready to use product.
- Fast drying.
- Dries in 2 – 4 hrs depending on ambient temperature.
- Seal pores on surfaces such as concrete.
- Excellent Bond strength to the substrate.
- Bonds with old bituminous material
- Improves the adhesion of bituminous material that is to be applied to the substrate.
Application Area :
- Priming bituminous, concrete or masonry surfaces prior to laying membrane promotes bonding, whether self-adhesive or otherwise.
- Applied in canal lining joints and concrete floor joints prior to pouring of the bitumen sealing compound for bonding.
Pack Size :
- 20L
ShaliTile® Glue
Benefits :
- Pre-packed adhesive mortar, which needs mixing of only water at site.
- High bond strength. Ideal for vertical / horizontal applications of tiles, granites, marble, etc.
- Can be used for interior / exterior concrete / plastered surface.
Application Area :
- Concrete / masonry.
- Cementitious plaster and render.
- Re-constituted stone.
Pack Size :
- 30Kg
ShaliPoxy® CTE 103
Benefits :
- Low viscosity formulation helps in easy application by brush or spray
- Flexible anti-corrosive / preventive coating for structures – MS or concrete – even where the structure is in continuous contact with water or submerged.
- Provides excellent resistance to corrosion, impact, thermal shock and abrasion.
- Cures to a hard, smooth and flexible surface with excellent resistance to sea / salt water, oil, acids, alkalis, crude oil and minerals.
- Compatible with cathodic protection.
Application Area :
- Crude oil storage tanks / underground structures
- Dams, Barrage gates, Penstocks.
- Foundation walls and sumps.
- sewage treatment plant, underground pipelines
- Splash zones in docks & harbors
ShaliPoxy® CTE 103 is not recommended for surfaces in contact with potable water and other
food stuffs.
Pack Size :
- 20 Ltr
ShaliMastic® HD / LC
Benefits :
- Not affected by marine organisms, soil chemicals and soil bacteria.
- Highly resistant to corrosion due to sea water / alkalis / acid.
- Retains its pliability over a wide range of temperatures.
- Provides an abrasion resistant tough coat.
- Provides a void-less, joint-less continuous film capable of taking expansions and contractions without cracking.
- Acts as an excellent water-resistant coating even under severe corrosive conditions.
Application Area :
- Underground metal storage tanks for diesel, petrol and
- other liquid / gas.
Other buried / submerged surface or equipment. - Interior / exterior surfaces of metal or concrete tanks, culverts, steel / wood pilings, filter screens, sluice gates, tank bases, trestles etc.
- Interior / exterior of barges and under-water structures.
Pack Size :
- 20 L
- 200 L
1K Assembly Foam
Benefits :
- Excellent adhesion on most substrates (except Teflon, PE and PP)
- High thermal and acoustical insulation.
- Very good filling capacities.
- Excellent stability (no shrink or post expansion)
- Excellent mounting capacities.
Application Area :
- Installation of window and door frames.
- Filling of cavities.
- Sealing of all openings in roof constructions.
- Creation of a soundproof screen.
- Mounting and sealing of window and door frames.
- Connecting of insulation materials and roof constructions.
- Application of soundproofing layers on motors.
- Improving thermal insulation in cooling systems.
Pack Size :
- 12 Pcs