Call Now - 9729536305, 9896436305
SIKA
Sika® Cim
Benefits :
- Compatible with all varieties of Portland Cement including Slag Cement
- Minimizes loss of mortar due to rebound in plastering jobs, hence great ease of application and saving
- Required at a very small dosage, hence economical
- Improves water tightness to a great extent
- Performs multiple roles of water reducer as well as waterproofer
- Improves workability without increased water content
- Reduced shrinkage, better finish
- Acts to disrupt the leakage causing capillary structures formed in concrete to cause leakages
- No added chloride thus not contributing to corrosion of steel
- Convenient to handle since suitable for both concrete and mortar
- Supplied in consumer friendly pack
Application Area :
SikaCim® is recommended for use in structural concrete, particularly for the following
- Flat Roof Slabs
- Beams
- Columns
Pack Size :
- 20Kg
- 10Kg
- 5Kg
- 1Kg
Sika® Raintite I
Benefits :
- Multipurpose Polymer
- Bonding Agent in repair & plastering
- Use for making polymer mortar
- Additives to cement based paints for waterproofing
- For treatment for leaching and salt petre action As a multipurpose mortar admixture for injection grouts
Application Area :
- Roof Slab
- Sunken Slab
- Water Tank
- Repair work
Pack Size :
- 20Kg
- 10Kg
- 5Kg
- 1Kg
SikaLatex® / SikaLatex® SBR-100
Benefits :
- Synthetic rubber emulsion
- Acts as modifier cum bonding agent of mortar & slurry
Application Area :
- Rendering & Coating
- Bonding tiles, Plastering
Pack Size :
- 20Kg
- 10Kg
- 5Kg
- 1Kg
Sika® CoolCoat/ Sovacryl
Benefits :
- Heat reflective white waterproof coating
- High SRI
- Algae & Fungi resistant
- Premixed flexible acrylic waterproofing membrane that can be applied directly from the container.
- Applied in a thick layer, it forms a waterproof, flexible film which adapts to the surface changes caused by tension or expansion.
Application Area :
- Waterproofing metal roofs, external walls of old buildings, gutters and asbestos roofs.
- Permissible substrate
- Metal
- Concrete and mortar
- Steel and zinc
- Timber
- Plastic and asbestos sheets
- Bituminous surfacing
- Masonry or brick
- Coverage - 250 sqft approx)
Pack Size :
- 20Kg
- 10Kg
- 5Kg
- 1Kg
SikaTop® Seal 107
Benefits :
- Compatible with drinking water
- SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system.
- It is applied to concrete and mortar to prevent water infiltration
- It comprises of a liquid polymer and a cement based mix incorporating special admixtures.
- Pre-batched components, hence ready to use
Application Area :
- USES Waterproofing applications for various structures such as: Potable concrete water tanks, reservoirs, waste water tanks
- Terraces, balconies, sunshades, etc.
- Basement and Retaining walls
- RCC gutters, drains and planter boxes
- Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack
- Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork
- Lift pits, sump, etc.
- Wet areas like toilets, kitchen, utility, sunk slabs
- Swimming pools, fountains, water bodies, canals
- Coverage - (20 kg Powder + 5 kg Liquid System - 70-80 sqft apporx)
Pack Size :
- 20Kg
- 10Kg
- 5Kg
- 1Kg
SikaTop® Seal 109
Benefits :
- SikaTop®-109 Seal IN is an elastomeric, liquid applied, crack bridging, two part high performance acrylic polymer modified cementitious waterproofing coating system with high degree of flexibility.
Application Area :
- USES Waterproofing applications for various structures such as: Raw water concrete tanks, reservoirs, waste water tanks
- Terraces, balconies, sunshades, etc.
- Flat and small roofs
- Basement and Retaining walls
- Swimming pools, fountains, water bodies, canals
- RCC gutters, drains and planter boxes
- Wet areas like toilets, kitchen, utility, sunk slabs
- Lift pits, sump, etc.
- Coverage - (30 kg Powder + 20 kg Liquid System - 250 sqft approx)
Pack Size :
- 20Kg
- 10Kg
- 5Kg
- 1Kg
SikaProof®-312 IN HDPE
Benefits :
- Pre-applied: Fixed before placing reinforcement and casting concrete
- High flexibility and crack-bridging capabilities
- No lateral water migration between the concrete structure and the membrane system
- Fully and permanently bonded to the reinforced concrete structure
- Not affected if the level of water table rises and falls
- Resistant to aggressive conditions in natural groundwater and soil
- Sound anti-puncture performance
Application Area :
SikaProof®-312 IN HDPE can be used for damp-proofing, waterproofing and concrete protection for basements, subway, tunnel and other below ground concrete structures against ground water ingress. Suitable For use on:
- Reinforced concrete walls with single and double faced form work
- Reinforced concrete base slabs
- Reinforced concrete footings and grade slab
- Extension and reconstruction works
- Prefabricated structures
Pack Size :
- 2.4 m x 20 m rolls in a PE foil
SikaShield® W159 ED 1.5 mm
Benefits :
- No-torch application allows for safe installation in confined spaces
- Fully bonded system ensures reliable waterproofing
- Can be applied on wet concrete
- Watertight against lateral water migration
- Fast and easy installation
Application Area :
The Product is used as a waterproofing membrane for:
- Basements and other below ground structures
- Vertical reinforced concrete walls
- Single and strip foundations
Pack Size :
- 1mtr. x 20 mtr.
Sika® MultiSeal T
Benefits :
- Very easy to apply
- Can be applied at low temperatures
- Weather-proof
- Resistant to UV exposure
- Self-adhesive
- Can be over-painted
- Good adhesion to many common building materials
Application Area :
Repairing, protecting and sealing applications:
- Roofs including sheet metal work
- Facades
- Broken roof tiles
- Leaking roof gutters
- Chimneys and roof lights
- Caravans and trailers
- Office containers
- Various types of duct work
Pack Size :
- 10mtr.
- 10mtr x 100m Roll
SIKA® HIBOND / SIKADUR 32 LP
Benefits :
- Long pot life and open time allows sufficient time for placement of new concrete
- Can be applied on moist surface also
- Once the two components of the material is mixed the material must be used within approx 4 hours.
Application Area :
- Sika® Hibond is a structural bonding agent applied between old and new concrete surfaces during casting of roof slabs, retaining walls, water tanks, columns,extension of balconies, etc
- Coverage - (600 g Liquid System - 12-30 sq apporx)
Pack Size :
- 600g System : Part A: 400g + Part B: 200g / 6kg system: Part A: 4kg+ Part B: 2kg
SikaBond®-124 Instant Nails
Benefits :
- Easy to apply
- Rapid initial grab after flash off
- Rapid strength gain
- Wide adhesion range
Application Area :
An adhesive to bond most components, such as:
- Skirting boards
- Wooden frames
- Battens
- Panels
- Mouldings
- Hard PVC profiles
- Sheet boards
- Metal protection angles
Pack Size :
- 333 g cartridge, 12 cartridges per box
SikaHyflex®-160 Construction
Benefits :
- Bubble-free curing
- Good workability
- Good adhesion to many substrates
Application Area :
- SikaHyflex®-160 Construction is designed for movement and connection joints in concrete and masonry facades.
Pack Size :
- 600 ml foil pack, 20 foil packs per box
Sikadur®-20 Crack Seal
Benefits :
- Semi elastic crack sealing
- Low viscosity
- Suitable in both, dry and damp conditions
- High adhesive strength
- No shrinkage
Application Area :
- Fill and seal non-structural crack and cavities in structural concrete such as concrete decks, balconies.
- concrete roof structures, wet room, swimming pool and especially before waterproofing works.
- Repair floor tile joint for leakage treatment at wet room.
Pack Size :
- A + B =160ml.
Sikagard-694 F(I), Component A
Benefits :
- Sikagard® -694 F (I) is a solvent free epoxy resin based putty like material. It has the special property that it is a moisture insensitive repair material
Application Area :
Sikagard® -694 F(I) is recommended for :
- Sealing of cracks both underwater and in dry conditions
- Sealing of cracks for concrete, metal and wooden surfaces
- Protection of concrete, steel, marine structures as protective coating at or below the water line
Pack Size :
- A+B =8kg
SikaGrout®-214 INS
Benefits :
- SikaGrout®-214 INS is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.
Application Area :
- To grout bearings, machine foundations, columns joints in precast construction etc.
- To grout anchors in concrete
- Sealing around penetrations
- To grout cavities, gaps and voids in concrete To grout base plate of turbine, compressor, boilers, pumps and heavy machinery.
Pack Size :
- 30kg
Sikadur-Combiflex® SG
Benefits :
- Approved for the use in contact with drinking water
- Easy adaptable to the construction method
- Excellent adhesion to different substrates
Application Area :
- Expansion joints
Pack Size :
- 25 RMT.
Sika AnchorFix®-3030
Application Area :
- Anchoring adhesive for fixing of non-expanding anchors in the following:
Structural work
- Rebar / steel reinforcement anchoring in new and refurbishment works
- Threaded rods
- Bolts and special fastening / fixing systems
Metalwork, carpentry
- Handrails, balustrades and supports
- Railings
- Window and door frames
Pack Size :
- 585ml.
SikaCeram®-50 Tilofix
Benefits :
- Bonding ceramic tiles on floor and wall
- Smooth application
- Suitable for most cementitious substrates
- Easy to use, only water to be added
- Suitable for absorbent ceramic and vitrified tiles
- Self curing
- Bonding vitrified tiles upto 4 square feet on floor
- Better bond than conventional cement based mortar
Application Area :
- Bonding the following types of tiles for floor and wall: Ceramic, Earthenware
- Bonding the following types of tiles for floor: Vitrified
- Bonding tiles for the following applications: Balconies, Kitchens, Residential environments, Terraces
Compliance:
- IS 15477-TYPE1
Pack Size :
- 20 kg, 40 kg
SikaCeram®-125 Easy Fix
Benefits :
- Layer thickness: 1–10 mm
- Reduced vertical slip
- Smooth application
- Easy to use, only water to be added
- Better bond than conventional cement based mortar
- Self curing
- Suitable for absorbent ceramic tiles and vitrified tiles
- Bonding floor and wall tiles
- Typical bonding substrates: Cementitious screed, concrete, plaster, ceramic tiles
Application Area :
- Bonding the following types of tiles: Vitrified, Ceramic, Earthenware
- Bonding tiles for the following applications: Balconies, Bathrooms, Kitchens, Residential environments, Terraces, Wet areas, Tile on tile in any of above areas
Compliance:
- C1TEN12004
Pack Size :
- 20 kg, 40 kg
SikaCeram®-155 (Grey)
Benefits :
- Ready to use, only water to added
- Suitable for fixing ceramic and medium sized vitrified tiles on wall and floor, Indoor & outdoor
- Tile on tile application in interior area
- Maximum thickness of 10 mm to be maintained using notched trowel
Application Area :
- Bonding the following types of tiles: Vitrified, Ceramic, Earthenware
- Bonding tiles for the following applications: Balconies, Bathrooms, Kitchens, Residential environments, Terraces, Wet areas, Tile on tile in any of above areas
Compliance:
- EN12004-C1T
Pack Size :
- 20 kg, 40 kg
SikaCeram®-212 (Grey)
Benefits :
- Ready to use, only water to added
- Suitable for fixing ceramic and medium sized vitrified tiles on wall and floor, Indoor & outdoor
- Tile on tile application in interior area
- Maximum thickness of 10 mm to be maintained using notched trowel
Application Area :
- Bonding the following types of tiles: Vitrified, Ceramic, Earthenware
- Bonding tiles for the following applications: Balconies, Bathrooms, Kitchens, Residential environments, Terraces, Wet areas, Tile on tile in any of above areas
Compliance:
- EN12004-C2T
Pack Size :
- 25 kg
SikaCeram®-255 (Grey & White)
Benefits :
- Layer thickness: 1–10 mm
- Extended open time
- Reduced vertical slip
- Smooth application
- Typical bonding substrates: Cementitious screed, concrete, plaster, ceramic tiles, calcium sulphate screed, gypsum fibre boards
Application Area :
- Balconies
- Bathrooms
- Commercial / Residential environments
- Facades
- Kitchens
- Interior and exterior use
- Terraces
- Wet areas
- Heavy trafficked floors
- Industrial floors
- Swimming pools
- Overlaying existing indoor sound ceramic tiles or stones
Compliance:
- EN12004-C2TE
Pack Size :
- 25 kg
SikaCeram®-288 H
Benefits :
- Layer thickness: 1–10 mm
- Extended open time
- Reduced vertical slip
- Smooth application
- Typical bonding substrates: Cementitious screed, concrete, plaster, ceramic tiles, calcium sulphate screed, gypsum fibre boards
Application Area :
- Balconies
- Bathrooms
- Commercial / Residential environments
- Facades
- Kitchens
- Interior and exterior use
- Terraces
- Wet areas
- Heavy trafficked floors
- Industrial floors
- Swimming pools
- Overlaying existing indoor sound ceramic tiles or stones
Compliance:
- EN12004-C2TES1
Pack Size :
- 25 kg
SikaCeram®-850 Design
Benefits :
- Grout joint range: 2–15 mm
- Easy application using cartridge gun
- 2-part double side-by-side cartridge with static mixer nozzle
- Floor and wall application
- Available in many colours
- Low shrinkage
- Abrasion resistant
- Good chemical resistance
- Good workability
- Stain resistant and easy to clean
Application Area :
Grouting tiles for the following interior residential and commercial building applications:
- Wet rooms
- Shopping malls
- Hospitals
- Food industry
- Swimming pools (indoors)
- Commercial / Industrial kitchens
Pack Size :
- 400 ml double side-by-side cartridge
SikaCeram®-888 Tile Grout EP
Benefits :
- GVery good workability
- Easy application
- Long open time
- Easy to clean joints with water
- Rapid hardening without cracking or shrinkage
- Waterproof and impermeable to liquids
- High mechanical resistance
- Good abrasion resistance
- Easy to clean and maintain
- Good chemical resistance
- Resistant to steam cleaning
- Stainless and colourfast
- Very good adhesion to ceramic tiles, mosaics, etc.
Application Area :
Grouting and bonding the following types of tiles:
- Ceramic and porcelain tiles
- Ceramic-, glass-, marble-, wood- made mosaic
- Marble and other natural stone
On the following surfaces, as tile adhesive on floors and walls:
- Gypsum or cement based substrates
- Old tiles § Iron
- Fiberglass reinforced plastic
Grouting and bonding tiles for the following applications:
- Swimming pools (including seawater pools), thermal pools, GRP pools, fountains, etc.
- Kitchens, tanneries, paper-mills, slaughterhouses, professional kitchens, etc.
- Laboratories of all kinds
Pack Size :
- 5 kg
SikaRep® Microcrete-4
Benefits :
- No vibration needed
- Easily pumpable
- Easy to mix and apply
- Excellent flow characteristics
- Rapid strength development
- High ultimate strengths
- Impact resistant
- Non-corrosive
- Non-toxic
- Iron and chloride free
- Dense and non-shrink concrete created by dual stage expansion
- Good bonding with existing concrete
- Adjustable consistency by controlling the water with in the recommended limit
Application Area :
SikaRep® Microcrete-4 is suitable for producing high performance micro-concrete for deep repairs to all concrete structures such as:
- Highway bridges and culverts
- Whafts and jetties
- Tunnels and mines
- Dams and reservoirs
- Car parks and basements
- Power stations
- Sewerage and water treatment structures
- Anywhere where localised deep repair is required
- Anywhere additional thickness is required (column and beam jacketing, etc.)
- Structrural strengthening of structure by section enlargement
Pack Size :
- 30 Kg
Sika® Chapdur (IN)
Benefits :
- Ready to use
- Good wear resistance
- High impact resistance
- Cost effective surface hardener
- Makes floor dust proof
- Non metallic and rust free
- Easy to clean
- Increased resistance to oils and grease
- Quality assured factory blending
- Suppresses superficial fibres in concrete
Application Area :
Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as:
- Warehouses
- Factories
- Shopping malls
- Public areas
- Restaurants
- Museums
- Parking lots
- Garages and Service stations
Pack Size :
- 30 Kg
Sika MonoTop®
Benefits :
- Easy to use (only to be mixed with water)
- Structural an Cosmetic repairs
- Possible to apply on vertical substrate in 50mm layers.
- Good adhesion strength
- Ideal where the repairs are more than 5 mm
- Sprayable – able to repair complex profiles easily with minimal rebound
Application Area :
- Repair of spalling and damaged concrete in buildings, bridges, infrastructure and super structure works
Pack Size :
- 5 Kg
Sikadur®-52 LP
Benefits :
- Solvent free
- Suitable for both dry and damp conditions
- Shrinkage free hardening
- High mechanical and adhesive strengths
- Hard but not brittle
- Low viscosity
- Injectable with single component pumps
Application Area :
- Injection resin with good adhesion to concrete, mortar, stone, steel, and wood.
- Used to fill and seal voids and cracks in structures such as bridges and other civil engineering, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.
- Effective barrier against water infiltration and corrosion promoting media.
- Structurally bonds concrete sections together.
Pack Size :
- 0.8 Kg
- 0.2 Kg
Sika Top Armatec® -108
Benefits :
- Easy to use.
- Excellent adhesion to steel.
- Good bonding coat for subsequent cement and epoxy-based repair mortar.
- Good barrier effect against water, chlorides and CO2.
- Contains corrosion inhibitors.
- Non-inflammable.
Application Area :
- On Steel for protection from corrosion.
- Repair of damage reinforced concrete with corroded reinforcing bars resulting from Carbonization.
- Against the action of Calcium Chlorides and de-icing salts.
- Preventive protection of reinforcing bars in slim reinforced concrete sections and filigree constructions.
Pack Size :
- 25 Kg
Sika® Rustoff-100
Benefits :
- Removes rust
- Temporarily prevents further rusting by providing a passivating coat
- To be applied with brush, cotton waste swab or spray gun on the affected metal surface
- Easy to apply since it is in liquid form
- For repairable structures when applied with brush /spray gun can reach even the most difficult rusted areas with congested reinforcements
Application Area :
Sika® Rustoff-100 removes rust and temporarily prevents further rusting of:
- New or old reinforcement steel in construction
- Embedded steel in repairable structures
- Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc.
- Ball bearings, valves, tools etc.
- Ideal for protecting reinforcements with insufficient cover or in thin sections.
Pack Size :
- 1 kg
- 20 kg
Sikadur®-32 LP
Benefits :
- Sikadur®-32 LP has the following advantages:
- Easy to mix and apply
- Solvent free
- Excellent adhesion to most structural materials
- Unaffected by moisture
- Highly effective even on damp surface
- Workable at low temperatures
- High tensile strength
- Longer pot life
Application Area :
- Injection resin with good adhesion to concrete, mortar, stone, steel, and wood.
- Used to fill and seal voids and cracks in structures such as bridges and other civil engineering, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.
- Effective barrier against water infiltration and corrosion promoting media.
- Structurally bonds concrete sections together.
Pack Size :
- 6 Kg
- 30 Kg